MX-M 453N

[MarkyB]

I have a Sharp MX-M453 that a tech cleared the Copy count in SIM-24-6. So now when the end user is called to get a copy count for billing, under System Settings/Total Count/Job Count, the count reading has changed. Is there anyway to re-write the original count back into the machine ? I have looked in the Service Manual extensively and found nothing. Thanks ahead of time .

[lky1978]

Re: MX-M 453N

I have a Sharp MX-M453 that a tech cleared the Copy count in SIM-24-6. So now when the end user is called to get a copy count for billing, under System Settings/Total Count/Job Count, the count reading has changed. Is there anyway to re-write the original count back into the machine ? I have looked in the Service Manual extensively and found nothing. Thanks ahead of time .

i always ask my customer hold the "copy" to get the total b/w count

[MarkyB]

Re: MX-M 453N

It shows the same New Count there also. Thanks !

[nottoosharp]

Re: MX-M 453N

It shows the same New Count there also. Thanks !

You can get counts on the internal prints. 22-6


Sent from my iPhone using Tapatalk

[spanky]

Re: MX-M 453N

The counts the customer can access were zeroed out at one time.

They can't be changed, just reset to zero.

[MarkyB]

Re: MX-M 453N

The counts the customer can access were zeroed out at one time.

They can't be changed, just reset to zero.

Thank You !

[Dark Helmet]

Re: MX-M 453N

I have a Sharp MX-M453 that a tech cleared the Copy count in SIM-24-6. So now when the end user is called to get a copy count for billing, under System Settings/Total Count/Job Count, the count reading has changed. Is there anyway to re-write the original count back into the machine ? I have looked in the Service Manual extensively and found nothing. Thanks ahead of time .

Check Sim 81 in extended test commands. On my MX2600 it shows the copy count and print count as well as other clear-able counters. Those might be the counters you are looking for.

[MarkyB]

Re: MX-M 453N

I got it, thanks guys ! There is a back door to rewrite the current meter that was accidentally cleared in SIM 24-6 . Boss says I can't share. Thanks for the input.

[nottoosharp]

Re: MX-M 453N

Check Sim 81 in extended test commands. On my MX2600 it shows the copy count and print count as well as other clear-able counters. Those might be the counters you are looking for.

We all already know it.


Sent from my iPhone using Tapatalk

[ZOOTECH]

Re: MX-M 453N

I got it, thanks guys ! There is a back door to rewrite the current meter that was accidentally cleared in SIM 24-6 . Boss says I can't share. Thanks for the input.

Good for your boss, I know the procedure is already posted, but the less it's out there - the less 'Goggle' search will find it.