MX-M363N Password Reset

[JLSam]

I've been able to reset passwords on other models through a small dip-switch in the back on the nic board. I tried the two dipswitches above the USB port, and only one works, with it booting to the CN update.
This machine has DSK installed. Please help.

I know it can be done.

[MHeon71]

Re: MX-M363N Password Reset

I think you are SOL. Normally, it is Sim 24-30, but with a DSK kit there is no Sim 24-30. Being able to change the password with a DSK kit, may defeat the purpose of having a DSK kit.

[JLSam]

Re: MX-M363N Password Reset

I did it. 88-8.
👌

Good God. It reset the counters to 0, but it's better than it being bricked. Ty anyway.



Sent from my ONEPLUS A3000 using Tapatalk

[angnov]

Re: MX-M363N Password Reset

JLSam - it's not clear how you did it. Can you explain?

Thanks!!

[Phil B.]

Re: MX-M363N Password Reset

JLSam - it's not clear how you did it. Can you explain?

Thanks!!

3 years dead thread.

[angnov]

Re: MX-M363N Password Reset

3 years dead thread.

Still a problem...

[Phil B.]

Re: MX-M363N Password Reset

Still a problem...

I did it. 88-8.
👌

Good God. It reset the counters to 0, but it's better than it being bricked. Ty anyway.


did you try this?^^^^^^


you really need to start your own new thread completely outlining what you have tried etc...

[angnov]

Re: MX-M363N Password Reset

I did it. 88-8.
��

did you try this?^^^^^^

I assumed 88-8 was a simulation code, but I don't have those options. I have DSK kit, but from this thread, it sounded like it was possible to reset the admin password.

[repn1999]

Re: MX-M363N Password Reset

yes you can reset it. It is a pain in the you know what. basically you have to wipe the hard drive completely out of the machine...using a pc and diskpart with cle command. then reinstall hard disk and bring machine back up from dead state using em update and reinstall all firmware, water mark and emanual. That will get it back to default. You will have to set the machine up though, as all settings and address book etc will be lost.