Al 1041 H4 Reset

Collapse
X
 
  • Time
  • Show
Clear All
new posts

  • techarpcanjr
    Guest replied
    unblocking h4 in all Sharp AL-16XX

    Originally posted by MHeon71
    You should be able to get into TC by entering clear - density select - clear - density select and once in simulations scroll to 14 and execute.
    you need to get into simulation mode as follows clear key - density select key - clear key - density select key, as fast as you can do it. copier's display is off.

    now copier is ready for resetting that code

    type 14 then start

    copier will auto shut down

    and it will be ready for copying

    Leave a comment:


  • MHeon71
    replied
    You should be able to get into TC by entering clear - density select - clear - density select and once in simulations scroll to 14 and execute.

    Leave a comment:


  • mkopoiuy
    started a topic Al 1041 H4 Reset

    Al 1041 H4 Reset

    anyone could tell me how to reset H4 code.

    thanks.
Working...