problem with sharp mx-m3014n

[alamoudi]

Dear gentlemen
I have a problem with sharp mx-m314n
When printing or copy
Please help me to resolve the issue
Please see attachment

[daileyrobn714]

Re: problem with sharp mx-m3014n

Dear gentlemen
I have a problem with sharp mx-m314n
When printing or copy
Please help me to resolve the issue
Please see attachment

First I would check my developer unit, make sure the mag roller is completely covered and developer.

Sent from my SM-G930V using Tapatalk

[Phil B.]

Re: problem with sharp mx-m3014n

ok so.....
life on consumables?
total on machine?
what have you done?

i always start with CLEANING the machine completely

have you recorded any errors?

[copiertec]

Re: problem with sharp mx-m3014n

I'm with Phil B on this one. What are your counts on drum, developer, transfer roller, etc.. What is the total count on the MFP, also what have you done to correct the issue? basic cleaning.... wait, don't tell me, I know, canned air! (sarcasm) That fixes everything... especially, when you blow all the crap out of the paper path on to a high voltage board. Just a guess on my part

[alamoudi]

Re: problem with sharp mx-m3014n

First I would check my developer unit, make sure the mag roller is completely covered and developer.

Sent from my SM-G930V using Tapatalk

Dear Sir thank you for your cooperation with me

In fact, I was replaced developer " MX-312NV " With a new powder " MX-312NV " I bought it before twenty months ago , Because I thought the problem was because developer . But after I've replaced it, the problem is still going on , So I'm sure the problem is not in developer , Unless there is an expiration date for the powder of developer .
Is there an expiry date for developer ?

[alamoudi]

Re: problem with sharp mx-m3014n

ok so.....
life on consumables?
total on machine?
what have you done?

i always start with CLEANING the machine completely

have you recorded any errors?

Dear Sir thank you for your cooperation with me

1- life on consumables?
I I bought the machine in 2016

2- total on machine?
How can I know, Can you tell me the way to know please

3- what have you done?
I've cleaned the entire machine with an air blower,
and I've replaced ink " MX-312FT " , I also replaced developer " MX-312NV "


have you recorded any errors?
his message comes : Toner Replenishment in Progress
Then comes this error : call for service code :F2-64

[daileyrobn714]

Re: problem with sharp mx-m3014n

Dear Sir thank you for your cooperation with me

In fact, I was replaced developer " MX-312NV " With a new powder " MX-312NV " I bought it before twenty months ago , Because I thought the problem was because developer . But after I've replaced it, the problem is still going on , So I'm sure the problem is not in developer , Unless there is an expiration date for the powder of developer .
Is there an expiry date for developer ?

They do have a shelf life, but I've never seen them expire. I'm not experienced enough to troubleshoot, I actually need to be in front of the machine. But I am curious to what the issue actually is so if you don't mind when you do find the solution can you post it thank you

Sent from my SM-G930V using Tapatalk

[Phil B.]

Re: problem with sharp mx-m3014n

I'm with Phil B on this one. What are your counts on drum, developer, transfer roller, etc.. What is the total count on the MFP, also what have you done to correct the issue? basic cleaning.... wait, don't tell me, I know, canned air! (sarcasm) That fixes everything... especially, when you blow all the crap out of the paper path on to a high voltage board. Just a guess on my part

read on your fears come to light

[Phil B.]

Re: problem with sharp mx-m3014n

Dear Sir thank you for your cooperation with me

1- life on consumables?
I I bought the machine in 2016 ** NO HOW MANY PAGES ARE ON THE MACHINE?

2- total on machine?
How can I know, Can you tell me the way to know please **YOU SHOULDN'T BE WORKING ON IT THEN

3- what have you done?
I've cleaned the entire machine with an air blower,
and I've replaced ink " MX-312FT " , I also replaced developer " MX-312NV " ** REPLACED TONER/DEV DID YOU INIT BOTH OF THEM? lomfl YUP CANNED AIR... WHY DO YOU THINK WE TECHS HAVE VACUUMS?


have you recorded any errors?
his message comes : Toner Replenishment in Progress
Then comes this error : call for service code :F2-64

SEE MY COMMENTS IN BOLD ABOVE^^^

now before you screw da pooch... HIRE A REAL TECH!

[alamoudi]

Re: problem with sharp mx-m3014n

They do have a shelf life, but I've never seen them expire. I'm not experienced enough to troubleshoot, I actually need to be in front of the machine. But I am curious to what the issue actually is so if you don't mind when you do find the solution can you post it thank you

Sent from my SM-G930V using Tapatalk

I will
Thanks again for your cooperation with me

[alamoudi]

Re: problem with sharp mx-m3014n

SEE MY COMMENTS IN BOLD ABOVE^^^

now before you screw da pooch... HIRE A REAL TECH!

In fact I am a novice in machinery maintenance

I do not have the money to bring a technician with a great experience

So I'll try to learn to fix this problem myself by reading in different sites and showing the problem to all the people who help beginners and sure I will find them

thank you again

[Phil B.]

Re: problem with sharp mx-m3014n

In fact I am a novice in machinery maintenance
I do not have the money to bring a technician with a great experience
So I'll try to learn to fix this problem myself by reading in different sites and showing the problem to all the people who help beginners and sure I will find them
thank you again

then may I suggest.. go to the " Manual Request " forum... get the Service Manual.. you SHOULD be able to google the User/Admin/Network manuals for free.

Study the theory and look up your issue.. most times they are simple ( could be costly ) Fixes.

[alamoudi]

Re: problem with sharp mx-m3014n

then may I suggest.. go to the " Manual Request " forum... get the Service Manual.. you SHOULD be able to google the User/Admin/Network manuals for free.

Study the theory and look up your issue.. most times they are simple ( could be costly ) Fixes.

I will do

[alamoudi]

Re: problem with sharp mx-m3014n

They do have a shelf life, but I've never seen them expire. I'm not experienced enough to troubleshoot, I actually need to be in front of the machine. But I am curious to what the issue actually is so if you don't mind when you do find the solution can you post it thank you

Sent from my SM-G930V using Tapatalk

The cause of the problem is :

HIGH VOLTAGE POWER SUPPLY BOARD PCPH0548 MPH3333 " RDENU0058QSPZ "

[lky1978]

Re: problem with sharp mx-m3014n

replace drum charger kit MX-311NC first before order the HV board. Sound like main charger leaking.