We have this unit In a customers office it is throwing this code every few days
We reset it several times then brought it into the office with the intent of replacing EEPROMS
In a month and a half it never threw a code The loaner an identical machine except that it had no inner finisher never threw a code in customers office
Took it back to customer within a week it started throwing the same code again every few days.
I guess I'm back to replacing EEPROMS but it makes no sense to me
Any help is appreciated
Serv. Man. says.
Cause PCU PWB EEPROM trouble.
Installation of non-initialized EEPROM.
PCU PWB trouble
EEPROM socket contact trouble.
Check & Remedy Replace the PCU PWB EEPROM.
Replace the PCU PWB.
Check contact of the EEPROM socket.
Put down the counter/adjustment values in the
simulation to prevent against loss of the counter data
and the adjustment values.
Use SIM16 to cancel the trouble.
We reset it several times then brought it into the office with the intent of replacing EEPROMS
In a month and a half it never threw a code The loaner an identical machine except that it had no inner finisher never threw a code in customers office
Took it back to customer within a week it started throwing the same code again every few days.
I guess I'm back to replacing EEPROMS but it makes no sense to me
Any help is appreciated
Serv. Man. says.
Cause PCU PWB EEPROM trouble.
Installation of non-initialized EEPROM.
PCU PWB trouble
EEPROM socket contact trouble.
Check & Remedy Replace the PCU PWB EEPROM.
Replace the PCU PWB.
Check contact of the EEPROM socket.
Put down the counter/adjustment values in the
simulation to prevent against loss of the counter data
and the adjustment values.
Use SIM16 to cancel the trouble.
Comment