MX2610N DC Power Supply swap w/mx2640 ??

[repn1999]

Re: MX2610N DC Power Supply swap w/mx2640 ??

I would not do it. Swapping electrical parts between series is not a good idea and will most likely cause wierd issues that are almost impossible to troubleshoot.

[moose55]

Re: MX2610N DC Power Supply swap w/mx2640 ??

All documentation that I see has different part #'s. The connectors may be the same, but something is different. You take your chance by powering it up!

[Toner Boy]

Brown-out killed DC Power. No PWB in stock, anyone try this swap? P/N's are different for sure.
All connectors are the same, I've hooked up most connectors to verify power restores but don't want to kill machine by plugging all in and running it.

Will have to pull machine and install loaner if can't fix quickly...