[Error Code] MX2314 - NETWORK SCANNING

[Leebs14]

So I have a customer who has a MX2314 set up to scan over SMB to a folder on their server, all worked fine until 29th April when it stopped working, looks like a microsoft update has stopepd this and i can onlt think its the SMB 1.0 or similar has been switched off and the MX2314 cannot scan to the higher SMB scan security level?

Am I right with this?

Would a MX2614 work?

We are having to swap it foc as its part of a large contract, so hoping a MX2614 will work or a MX2640 if needed?

Please help?

[mansart]

Re: MX2314 - NETWORK SCANNING

MX2640 will only support SMB ver 2

You could (if allowed) run a ftp service to accept scans to folder.

[mojorolla]

Re: MX2314 - NETWORK SCANNING

SMBv1 was dumped in 2014 so it is doubtful this is the root cause 7 years later.
Check your job log for the specific error code. Generally, the folder path, username or password has changed. The error code will point you in the right direction.

[onetek]

Re: MX2314 - NETWORK SCANNING

I have a few 2640,3140,4101,4110... that smb scanning stopped working. Ended up using old Network Scanner Lite from Sharp which basically sets up ftp scanning...

[RascalMJ]

Re: MX2314 - NETWORK SCANNING

I have a few 2640,3140,4101,4110... that smb scanning stopped working. Ended up using old Network Scanner Lite from Sharp which basically sets up ftp scanning...

I have started using this as well, in more difficult places or where it sees to get "broken" frequently. It works pretty well, is quick and easy