BP-70M65 with H2-01 not clearing with new fuser?

Collapse
X
 
  • Time
  • Show
Clear All
new posts

  • danny464
    replied
    Thanks ihatefinishers13 and ron67601​ it indeed ended up being the PCU PWB

    Leave a comment:


  • ihatefinishers13
    replied
    After the fuser, it's pretty much boards. Whether it be PCU or a power supply board.

    Leave a comment:


  • ron67601
    replied
    i had that on a BP-50C45 and it wasn't the fuser either. Ended up being the PCU pwb.

    Leave a comment:


  • danny464
    started a topic BP-70M65 with H2-01 not clearing with new fuser?

    BP-70M65 with H2-01 not clearing with new fuser?

    Hello, anyone had any issues with the new monochrome series from Sharp?
    We have a BP-70M65 we placed 1 year ago, 380,000 prints.
    It has h2-01 and it did not clear with a new fuser. We also brought the fuser of the machine back to the office and it is working fine here.
    Sharp is recommending a board but wondering if anyone has seen something similar. Thank you!
Working...