6240 developer unit swaps.

[Hansen88]

Hello, I am wondering if anyone knows if you can change the base plates, like on other sharps so you can use the dv unit in a different slot? I have a machine where the cyan unit is shot. I have a brand new black unit that I would like to use. I dont have another machine in shop to try it out on. Thanks

[DavePo]

Re: 6240 developer unit swaps.

It appears that they are the same.

[Hansen88]

Re: 6240 developer unit swaps.

It appears that they are the same.

Cool. Thanks for the info.

[spanky]

Re: 6240 developer unit swaps.

ATC sensors are different between the black and the color developer units.

[Prints Charming]

Re: 6240 developer unit swaps.

100% works fine. Done this a few times now.
I always swapped over the base plate, harness, sensor and front cover (so the correct color was showing). The hopper/auger unit is the same on all 4 dev units.