arm-450n hard disk

[DINGO]

[swagreis]

i think its firmware does not support this capcity
i tried HD of 7.5GB and it worked will

[vlad_]

At installation in device HD> or = the demanded volume, but other manufacturer (only IDE) it is necessary to make following actions:
1. To establish crosspieces on initial and final disks in the necessary position.
2. Program Acronis True Image Or Norton Ghost, in the environment of DOS, it is necessary to make an exact copy of all available sections from an original serviceable disk on a new disk of any volume. Copying of sections is necessary for making, having connected an initial disk with one IDE slot, and a new disk to second IDE slot. Copying to make on clusters, in real time, not creating a dump. As a result the disk big becomes the size an exact copy of an initial disk.
3. After procedure (lasts sometimes more than 1-2 hours) it is necessary to return crosspieces on disks in an initial status.
Important: At copying of sections on disks with identical volume not to mix their places)).

[DINGO]

RE

Ok
but one question, y have opne arm-450n that suport the 40 gb hdd, is possible y do a clone ? why? can help me.

thanks

[vlad_]

Ok
but one question, y have opne arm-450n that suport the 40 gb hdd, is possible y do a clone ? why? can help me.

thanks

I’m sorry. I have not correctly understood an initial problem. Difficulties of translation

[DINGO]

re

Ok
Vlad, y want now how y can update the firmware.
if is whith a program and where y find it, and if is by network conection, or paralel conetion.
thanks y recived the file.

[vlad_]

Ok
Vlad, y want now how y can update the firmware.
if is whith a program and where y find it, and if is by network conection, or paralel conetion.
thanks y recived the file.

I personally did updating very much for a long time. It became by means of a parallel cable and program FCOPY.EXE I did updating by one file. Thus it is necessary to rearrange as necessary crosspieces. The instruction look in e-mail.

[DINGO]