Re: Apple computer print driver
Good to know,thanks, that ps kit is 250 , there not doing any special graphics , graphs.
Apple computer print driver
Collapse
X
-
Re: Apple computer print driver
If i remember correctly from 10.14 onwards there is a "Generic PCL driver" that comes with OSX/Mac OS. It is very limited but it better than nothing. Good luckLeave a comment:
-
Re: Apple computer print driver
Just looked at the brochure. It's an option. Would need a product key to enable it. Not sure what the cost is for an MX-PK11. Are you a Sharp dealer? You will need access to their product key site.
I have loaded Sharps latest and greatest onto the new Mac OS without any issues.
Good luck
Bil
sounds good ,many thanks ,Dave.Leave a comment:
-
Re: Apple computer print driver
Just looked at the brochure. It's an option. Would need a product key to enable it. Not sure what the cost is for an MX-PK11. Are you a Sharp dealer? You will need access to their product key site.
I have loaded Sharps latest and greatest onto the new Mac OS without any issues.
Good luck
BilLeave a comment:
-
Re: Apple computer print driver
my guess is it’s probably not in there . Is it an easy install? File or board ? I also just read the new Ventura 13 is not supporting ps anymore?Last edited by davebtech; 05-02-2023, 01:12 PM.Leave a comment:
-
Re: Apple computer print driver
Make sure postscript is enabled. Not sure if it was standard or an option on this model. Check sim 22-10 to verify. If you don't have postscript it won't work.
Good luck
BilLeave a comment:
-
-
Re: Apple computer print driver
What machine are you printing to? I have had great success with the Sharp PPD. Make sure when you install it it finds the correct PPD for your unit. Not the generic driver or airprint (unless thats enabled)
Good luck
BilLeave a comment:
-
Apple computer print driver
What’s the best workable print driver for the apple desktops? Is there one that works for everything? Looks like there system is Ventura 13.2 Seems every time I try , nothing works….. Thanks for any input DaveLast edited by davebtech; 05-01-2023, 11:23 PM.
Leave a comment: