service mode on AR-m237 sharp... please help me!?!?!

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • youngblood
    copier janitor...=)
    • Apr 2009
    • 18
    #1

    service mode on AR-m237 sharp... please help me!?!?!

    i've tried everything i can think of to get into service mode on this machine... i'm a kyocera\ricoh tech that just got forced into working on sharps so if anyone will please help me, thank you... i just need the code\procedure to get into service mode on this machine AR-M237 SHARP... and someone to tell me the developer initialization sequence\simulation. i'm P.M.'ing this machine...

    thank you all soo much,
    Cameron "youngblood" Webb
    Desert Office Solutions. LLC.
    Tags: ar-m237, arm237, concentration, life, mode, service, sharp
    • MOPARMAN
      Junior Member
      • Apr 2009
      • 5
      #2
      Sim Codes

      Hello, You'll also need to reset Maint., developer and drum counters if doing a full PM. to get in be sure you are in the copy mode-press the copy mode key located next to the main display then use what we call "P Star C Star" That is press Pound Key then Astrid Key then Clear Key then Astrid key one right after the other. Sim codes as needed are : Developer Calabration 25-2, Developer counter clear 24-5, Maint cuonter clear 24-4, Drun cuonter clear 24-7.
      25-2 for example from sim mode:
      press NO. keys 25, press copy start key, press NO. key 2, press copy start
      Hope this helps BE SHARP Man, Allen

        Comment

        • jprecht
          Trusted Tech

          100+ Posts
          • Dec 2008
          • 104
          #3
          sharp sims.

          MOPARMAN must be pretty sharp!!! he has given you all you need. if you have further ??? write. have all the sharps on disc.; jp P. S. i grew up in huntington park!!!
          Last edited by jprecht; 05-21-2009, 12:24 AM. Reason: P.S.
          IT IS BETTER TO REMAIN QUIET AND BE THOUGHT A FOOL
          THAN TO SPEAK AND REMOVE ALL DOUBT

            Comment

            • ZOOTECH
              Senior member of CRS

              Site Contributor
              2,500+ Posts
              • Jul 2007
              • 3375
              #4
              It is important to do a CA after 25-2 to store the toner concentration level. Then you can do the counter resets.
              "You can't trust your eyes, if your mind is out of focus" --

                Comment

                • blackcat4866
                  Master Of The Obvious

                  Site Contributor
                  10,000+ Posts
                  • Jul 2007
                  • 23006
                  #5
                  I have started running the developer stir a couple times, especially if your readings are outside 90-110. I've got nothing else to add. =^..^=
                  If you'd like a serious answer to your request:
                  1) demonstrate that you've read the manual
                  2) demonstrate that you made some attempt to fix it.
                  3) if you're going to ask about jams include the jam code.
                  4) if you're going to ask about an error code include the error code.
                  5) You are the person onsite. Only you can make observations.

                  blackcat: Master Of The Obvious =^..^=

                    Comment

                    • djv
                      Technician
                      • Feb 2009
                      • 27
                      #6
                      This came directly from sharp tech's, they claim this will also lengthen the dev life.

                      Open front door and do the following

                      sim 24-4 maintenance
                      sim 24-5 dev
                      sim 24-7 drum
                      sim 24-11 reset drum and dev rotation/timer

                      sim 25-2 dev initializing, you get the message door open and then close the door and hit start again

                      since doing this procedure I notice I get 40-60k more copies from the developer

                        Comment

                        Previous template Next
                        Working...