Sharp AR-C160 digital colour.

Collapse
X
 
  • Time
  • Show
Clear All
new posts

  • ZOOTECH
    replied
    Good catch Blackcat, I forgot this machine didn't auto configure; TC 26-1 / no finisher = 0, ARSS2 = 2, and ARFN4 = 2.

    Leave a comment:


  • blackcat4866
    replied
    If this is the first time you've seen this machine or it was just recently acquired, what usually happens here is that someone decided not to install the sorter, but did not change he machine configuration settings in simulation 26.

    It's been a long time since I've done this, so forgive me if the details are fuzzy. I believe that it's sim 26-01, and there is a number entered there that is the sum several numbers, with a specific unique number for each accessory. I can dig up the details, if that's what you need. =^..^=

    Leave a comment:


  • ZOOTECH
    replied
    Communication trouble between PCU pwb and sorter control pwb; try reseating all connectors on sorter control pwb and check the sorter interface cable.

    Leave a comment:


  • cliffhangers
    started a topic Sharp AR-C160 digital colour.

    Sharp AR-C160 digital colour.

    Hi.this sharp AR-C160 is displaying error code F1-70 please kindly help.Thanks in advance.
Working...