ARM 205

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • tulipano
    Trusted Tech
    • May 2010
    • 124
    #1

    ARM 205

    Salve dovrei sostituire tamburo lama e developer, volevo sapere quali tarature ci sarebbero da fare. Come si entra e cosa bisogna fare nella programmazione sp? Grazie mille

    hello blade should i replace drum and developer, i wanted to know what we have to do settings. How to join and what to do in programming sp? Thank you
    Tags: 205, arm, blade, developer, drum, interrupt, replace, set, settings, wanted
    • blackcat4866
      Master Of The Obvious

      Site Contributor
      10,000+ Posts
      • Jul 2007
      • 22997
      #2
      To enter Service Mode on a Pegasus: # > Interrupt > Clear > Interrupt


      20-01 Maintenance Counter Reset
      24-07 Drum Counter Reset
      42-01 Developer Counter Reset



      Per entrare Modo di Servizio su un Pegaso: #> Interrompe> Chiarisce> Interrompe

      20-01 Manutenzione Contraddice il Ripristino
      24-07 Tamburo Contraddice il Ripristino
      42-01 Sviluppatore Contraddice il Ripristino

      I hope that translated properly. =^..^=

      If you'd like a serious answer to your request:
      1) demonstrate that you've read the manual
      2) demonstrate that you made some attempt to fix it.
      3) if you're going to ask about jams include the jam code.
      4) if you're going to ask about an error code include the error code.
      5) You are the person onsite. Only you can make observations.

      blackcat: Master Of The Obvious =^..^=

        Comment

        • tulipano
          Trusted Tech
          • May 2010
          • 124
          #3
          grazie mille

            Comment

            • blackcat4866
              Master Of The Obvious

              Site Contributor
              10,000+ Posts
              • Jul 2007
              • 22997
              #4
              If you'd like a serious answer to your request:
              1) demonstrate that you've read the manual
              2) demonstrate that you made some attempt to fix it.
              3) if you're going to ask about jams include the jam code.
              4) if you're going to ask about an error code include the error code.
              5) You are the person onsite. Only you can make observations.

              blackcat: Master Of The Obvious =^..^=

                Comment

                Previous template Next
                Working...