FO-2080 service mode entry

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • Solotime
    Trusted Tech

    100+ Posts
    • Feb 2009
    • 223
    #1

    FO-2080 service mode entry

    Hi Guys,
    Had a customer call that had a power failure and now they have an H4 on their FO-2080. I am quite familiar with the Sharp AL series which this machine seems to be nearly identicle to. I am sure I just need to reset the H4 but can not get any of the common key sequences to work. Like C,Auto,C, Auto etc.
    Let me know if anyone has the sequence for this model.
    Thanks!
    Tags: auto, customer, interrupt, key, mode, power, power failure, reset, service, sharp, work
    • ZOOTECH
      Senior member of CRS

      Site Contributor
      2,500+ Posts
      • Jul 2007
      • 3375
      #2
      Originally posted by Solotime
      Hi Guys,
      Had a customer call that had a power failure and now they have an H4 on their FO-2080. I am quite familiar with the Sharp AL series which this machine seems to be nearly identicle to. I am sure I just need to reset the H4 but can not get any of the common key sequences to work. Like C,Auto,C, Auto etc.
      Let me know if anyone has the sequence for this model.
      Thanks!
      Are you asking for the AL2080? If so, press # - Interrupt - C - Interrupt.
      If it is the Fo2080, try # - * - C - *.
      Last edited by ZOOTECH; 03-04-2011, 09:50 PM.
      "You can't trust your eyes, if your mind is out of focus" --

        Comment

        • Solotime
          Trusted Tech

          100+ Posts
          • Feb 2009
          • 223
          #3
          No I needed it for an FO-2080. I found it.....it was #, *, C, * or pound star c star

            Comment

            Previous template Next
            Working...