mx 2600 n code c410

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • berg77
    Technician
    • Mar 2011
    • 10
    #1

    mx 2600 n code c410

    can anyone help me to solve this mx2600n problem??? it says call for service code c410
    Tags: 260, 2600, 600, c41, code, mx2600, service, service code, solve
    • divad2k1
      Trusted Tech

      100+ Posts
      • Sep 2010
      • 147
      #2
      C4-10
      PTC no control

      Trouble content
      Detail PCU
      Cause The engine soft SW8-3 in SIM55-1 is set to "1".

      The PTC control is not executed. (The PTC does not operate.)

      When the engine soft SW8-3 in SIM55-1 is set to "1", the PTC output, the heater control, and the error detection are disabled. When this setting is made in case of a PTC unit trouble, the PTC function is disabled regardless of the PTC trouble and printing operation can be performed.

      Check & Remedy Set the engine soft SW8-3 in SIM55-1 to "0".

      (The mode returns to the normal PTC control mode.)

        Comment

        • Nachoman4life
          Trusted Tech

          Site Contributor
          100+ Posts
          • Oct 2007
          • 212
          #3
          Replace Primary Transfer corona
          Where the heck is my spring hook?

            Comment

            • JustManuals
              Field Supervisor

              5,000+ Posts
              • Jan 2006
              • 9838
              #4
              This Parts & Service manual can now be purchased for $12.77 and downloaded immediately after payment from
              Just Manuals | The Internet's largest selection of manuals | Instant Downloads


              Paul@justmanuals.com

                Comment

                • berg77
                  Technician
                  • Mar 2011
                  • 10
                  #5
                  thanx

                    Comment

                    Previous template Next
                    Working...