Looking for tech opinions on this model. considering placing under contract.
Thanks,
Nick
Thanks,
Nick
-
Don't take that toner with me! -
Pretty good machines. The fusers were the only real issues with these. -
Clicking & clunking? Or has that been resolved with an update?If you'd like a serious answer to your request:
1) demonstrate that you've read the manual
2) demonstrate that you made some attempt to fix it.
3) if you're going to ask about jams include the jam code.
4) if you're going to ask about an error code include the error code.
5) You are the person onsite. Only you can make observations.
blackcat: Master Of The Obvious =^..^=Comment
-
Yep, the noise has pretty much been resolved after about the 6th iteration of the fuser.Comment
-
hi
not the best color quality
if you want much better quality go for mx-2301
taComment
-
Thanks for all your opinions. You have been very helpful.
NickDon't take that toner with me!Comment
-
consider a good machine, but toner consumption higher than mx2301Comment
-
Has interesting print issues when doing full page color prints (shadow areas come in looking very unusual with the rest of the image perfect). Resolved by changing driver from HPGL to raster but makes printing very slow, only color machine that I have had this problem with so far.
Good luck.
BilComment
Comment