MAINTENANCE REQUIRED appeared on the screen of ar-m236. do you know guys whats the problem with this machine? the machine still continue working but I'm bothered with the warning... any help is much appreciated. thanks in advance. I'm new in this field in office equipment technician.
-
-
Re: Sharp ar-m236 (maintenance required)
This Parts & Service manual can be purchased for $12.77 and downloaded immediately after payment from
Just Manuals ~ The Internet's largest selection of manuals ~ Instant Downloads
Paul@justmanuals.comComment
-
Re: Sharp ar-m236 (maintenance required)
just need to reset some of the counters to turn off message....i usually clear counters in 24-04, 24-11-01, 24-01-01, 02, & 03...to enter code-type simulation: copy mode key ON > Program key ON > Asterick (*) key ON > CLEAR key ON > Asterick (*) key ON > ready for input of a main code of simulation....Comment
-
Re: Sharp ar-m236 (maintenance required)
No ... don't actually replace any of those worn out parts, just wait until they start falling off the machine. =^..^=If you'd like a serious answer to your request:
1) demonstrate that you've read the manual
2) demonstrate that you made some attempt to fix it.
3) if you're going to ask about jams include the jam code.
4) if you're going to ask about an error code include the error code.
5) You are the person onsite. Only you can make observations.
blackcat: Master Of The Obvious =^..^=Comment
-
Re: Sharp ar-m236 (maintenance required)
Depending how old the drum is you won't run into problems on that machine for a while. The M count pops at 75k. Ive taken them up to 100k with no problems. Before you start getting light copies your probably going to get lines from the charger first.Evil will always triumph because good is dumb.Comment
-
Re: Sharp ar-m236 (maintenance required)
If you know the simulation just adjust the copy life, let say increase by 5K the next time the maintenace required appear replace the consumables...Comment
complaining about everything,but dont replace nothing
Comment