407 scanner slam

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • sc3
    Technician
    • Mar 2011
    • 20
    #1

    [Misc] 407 scanner slam

    Anyone remember 407 scanner slam, its been so long since I had one do this or even seen one up close. I believe it is a specific pulley or wire shift. Its not the pwb and motor. something simple I just don't remember yet. Either way good for kicks it breaks the normal day to day.
    Thanks SC3
    Tags: 407, close, good, long, motor, pwb, scan, scanner, shift, wire
    • blackcat4866
      Master Of The Obvious

      Site Contributor
      10,000+ Posts
      • Jul 2007
      • 22997
      #2
      Re: 407 scanner slam

      It's usually the board, but occasionally the motor also. Keep in mind that as these machines get older, every machine in the graveyard has bad scanner PWB, bad PCU, bad power supply, all very common and no usable spares in the graveyard. =^..^=
      If you'd like a serious answer to your request:
      1) demonstrate that you've read the manual
      2) demonstrate that you made some attempt to fix it.
      3) if you're going to ask about jams include the jam code.
      4) if you're going to ask about an error code include the error code.
      5) You are the person onsite. Only you can make observations.

      blackcat: Master Of The Obvious =^..^=

        Comment

        • bilyahn
          Service Manager

          1,000+ Posts
          • Dec 2006
          • 1470
          #3
          Re: 407 scanner slam

          I'm not sure if this causes the scanner slam but look at the white rollers that the scanner cable are run around. I have had these go bad all of the time.

          Good luck.

          Bil

            Comment

            • sc3
              Technician
              • Mar 2011
              • 20
              #4
              Re: 407 scanner slam

              I think you are correct, the one pulley under the black roller gets sticky thats why the scanner slams insted of coding.
              the bearings are not the best for that app. thanks for the memory jog.

                Comment

                Previous template Next
                Working...