[Misc] copy counter MX2300

[dibyendu]

after sucessfull completion of 6 year in canon now i joined sharp. i have facing a big problem. i have wrongly cleared B/W & Color copy counter in simulation mode in Mx-2300 machine. now when i perss and hold the copy button it starts fron 000045. but in sim 22-1 it shows pervious copy counter. now any body tell me the procedure how to put the pervious counter again in that machine. till now customer not know that problem, so plz. if there is any way to put the old counter again in that machine reply me immediately.. waiting for your valuable feedback..

[Akitu]

Re: copy counter MX2300

after sucessfull completion of 6 year in canon now i joined sharp. i have facing a big problem. i have wrongly cleared B/W & Color copy counter in simulation mode in Mx-2300 machine. now when i perss and hold the copy button it starts fron 000045. but in sim 22-1 it shows pervious copy counter. now any body tell me the procedure how to put the pervious counter again in that machine. till now customer not know that problem, so plz. if there is any way to put the old counter again in that machine reply me immediately.. waiting for your valuable feedback..

There's a second level of simulations on Sharp products that may allow you to change your value to what it was before, but you'd probably have to call Sharp for it.

[Dark Helmet]

Re: copy counter MX2300

Check your private messages.

[schotschen]

Re: copy counter MX2300

Hey there!
A few Weeks ago, i had the Same Mistake... So The Customer is not so fussy and
it was no prob for him.
So i am a dainty person and this is in my mind. Want to Fix this. When there is a solution for this plz tell me!
Thanks Guys

[Ashley tiger]

Re: copy counter MX2300

I would also like this information, I did exactly the same thing!

Ash