MXM850N L4-06 error

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • redserv
    Trusted Tech

    250+ Posts
    • May 2010
    • 307
    #1

    MXM850N L4-06 error

    yes guys has been one of those weeks, been having lots off MFP problems,the error says developer motor Problem, i have done a visual inspection on the developer drive gear, the developer unit seems ok,however when i try to rin simulation 25-1 nothing happens, the motor wont turn, i dont have a motor to change at the moment,have you guys experienced L4-06 error code with this MFP?thanks again guys, i cant live without this site
    Tags: None
    • rainmaker
      Technician

      50+ Posts
      • Jul 2011
      • 77
      #2
      Re: MXM850N L4-06 error

      I am think the code is a L4-04. before i throw in a motor,i would check to see if you have 38 volts(dc) to the motor.when you go into test command 25-1 does it go right into the L4? good luck..rainmaker

        Comment

        • redserv
          Trusted Tech

          250+ Posts
          • May 2010
          • 307
          #3
          Re: MXM850N L4-06 error

          thanks for the tip i'll check it out and report back.

            Comment

            • blazebusiness
              SanDiegoCopierRepair.com

              Site Contributor
              1,000+ Posts
              • Apr 2010
              • 1246
              #4
              Re: MXM850N L4-06 error

              Originally posted by redserv
              yes guys has been one of those weeks, been having lots off MFP problems,the error says developer motor Problem, i have done a visual inspection on the developer drive gear, the developer unit seems ok,however when i try to rin simulation 25-1 nothing happens, the motor wont turn, i dont have a motor to change at the moment,have you guys experienced L4-06 error code with this MFP?thanks again guys, i cant live without this site
              Please verify that code for us. Agree that you probably mean L4-04 as this model has no L4-06 code. Have had dv units that seemed ok but replacing the unit fixed the problem anyway. Check the voltage to that motor as per rainmaker. Also check that drum turns freely and blade has not flipped. Longshot-----updating firmware can also occasionally solve problems.
              sigpicAnything can be made to work if you fiddle with it long enough- San Diego Copier Repair.com

                Comment

                • redserv
                  Trusted Tech

                  250+ Posts
                  • May 2010
                  • 307
                  #5
                  Re: MXM850N L4-06 error

                  sorry guys for the improper information its L4-04,thanks for the help guys.

                    Comment

                    • blazebusiness
                      SanDiegoCopierRepair.com

                      Site Contributor
                      1,000+ Posts
                      • Apr 2010
                      • 1246
                      #6
                      Re: MXM850N L4-06 error

                      Originally posted by redserv
                      sorry guys for the improper information its L4-04,thanks for the help guys.
                      Glad to help out....please post back & let us know what fixed the problem. Good Luck.
                      sigpicAnything can be made to work if you fiddle with it long enough- San Diego Copier Repair.com

                        Comment

                        Previous template Next
                        Working...