[CQ] Mx3500n color not correct

[moha zaz]

Thank you all for help us
i have a problem in MX3500N same color did not correct like Violet,

, Susan ,Purple, Blue and when i copy original paper which have Seals the output paper did not like the original.Although I used original catridge !!!

[Akitu]

Re: Mx3500n color not correct

That translator needs some work. I had no idea Susan was a colour.

From what I gather, the colours are not coming out correctly? Try to calibrate the machine, if it was enabled there should be an option on the 5th page of the copy settings menu for user calibration. I have no idea if you're a tech or not so be sure to follow the appropriate calibration sims.

44-02
44-06
44-26
46-24
44-26

Apologies if this isn't your issue, but your first message kind of makes my brain hurt.

P.S. Please upload a sample of the colour Susan.

[moha zaz]

Re: Mx3500n color not correct

That translator needs some work. I had no idea Susan was a colour.

From what I gather, the colours are not coming out correctly? Try to calibrate the machine, if it was enabled there should be an option on the 5th page of the copy settings menu for user calibration. I have no idea if you're a tech or not so be sure to follow the appropriate calibration sims.

44-02
44-06
44-26
46-24
44-26

Apologies if this isn't your issue, but your first message kind of makes my brain hurt.

P.S. Please upload a sample of the color Susan.

Thank you for reply
sorry but my language not good,any way when i tried to 44-26 after executed the result for all color was error K,C,M,Y?
i attach 2 file the first is for the color which i named Sousn and the other file for 46-2483739.jpg1.jpg

[Akitu]

Re: Mx3500n color not correct

Haha, good job. The susan colour was just a joke, though the samples are helpful.

How many copies have been done on this machine? It looks like your transfer belt may be wearing out at a glance, also you're having some trouble laying down the yellow.

When you execute sim 63-11, is def 2 selected or def 1? Def 2 adds a bit of extra tone to the cyan (which I assume is our friend Susan) to make up for the lackluster cyan produced by these machines.

[moha zaz]

Re: Mx3500n color not correct

Haha, good job. The susan colour was just a joke, though the samples are helpful.

How many copies have been done on this machine? It looks like your transfer belt may be wearing out at a glance, also you're having some trouble laying down the yellow.

When you execute sim 63-11, is def 2 selected or def 1? Def 2 adds a bit of extra tone to the cyan (which I assume is our friend Susan) to make up for the lackluster cyan produced by these machines.

i printed and copy more than 300000 pages
after i executed 63-11 i got Def1 select

[mojorolla]

Re: Mx3500n color not correct

If you look at the sample under magnification, you can see your colors are not aligned very well. 61-4 to align black and 50-22 to align color.

Susan Cyan
Maggie Magenta
Yonosh Yellow
Billy Black

I have deletions in my Billy with streaks of Yonosh.....sounds serious.

[moha zaz]

Re: Mx3500n color not correct

If you look at the sample under magnification, you can see your colors are not aligned very well. 61-4 to align black and 50-22 to align color.

Susan Cyan
Maggie Magenta
Yonosh Yellow
Billy Black

I have deletions in my Billy with streaks of Yonosh.....sounds serious.

thank's all '
i attach the test page after 61-4
i attach the file that MX-3500N_20130130_193932_001.jpg