ar208d with arfx13

Collapse
X
 
  • Time
  • Show
Clear All
new posts

  • Calillinois
    Guest replied
    Re: ar208d with arfx13

    Drop modem speed to 9600bps. Lock the V.27 moden in at 96K. Turn of Jbig and all other modems. Only send and receive at 96K.

    Leave a comment:


  • ZOOTECH
    replied
    Re: ar208d with arfx13

    Originally posted by foudl
    Can you send it in PM i don't think i can find it

    Thanks in advance
    You'll get it if a few moments.

    Leave a comment:


  • foudl
    replied
    Re: ar208d with arfx13

    Originally posted by ZOOTECH
    No, it concerns problems with a G3 fax (analog) trying to send over a digital line.
    Can you send it in PM i don't think i can find it

    Thanks in advance

    Leave a comment:


  • ZOOTECH
    replied
    Re: ar208d with arfx13

    Originally posted by foudl
    I work with Sharp Canada, the tech tips that i have is relate with a 4 wires cable instead of 2, is it the TT you're talking about?
    No, it concerns problems with a G3 fax (analog) trying to send over a digital line.

    Leave a comment:


  • foudl
    replied
    Re: ar208d with arfx13

    Originally posted by ZOOTECH
    Check out TT-050415_1.
    I work with Sharp Canada, the tech tips that i have is relate with a 4 wires cable instead of 2, is it the TT you're talking about?

    Leave a comment:


  • ZOOTECH
    replied
    Re: ar208d with arfx13

    Originally posted by foudl
    Customer changed telephone provider for a voice over ip and he complain that the machine gives error E-28 or E30 randomly,i know that the fax used to work fine for the last 5 years, is there any solutions for that kind of prob.

    The ECM is off ,i don't know what else could be done .
    Check out TT-050415_1.

    Leave a comment:


  • foudl
    started a topic ar208d with arfx13

    ar208d with arfx13

    Customer changed telephone provider for a voice over ip and he complain that the machine gives error E-28 or E30 randomly,i know that the fax used to work fine for the last 5 years, is there any solutions for that kind of prob.

    The ECM is off ,i don't know what else could be done .
Working...