toshiba e studio 520

[Orion2010]

hello all,
i have toshiba e-studio 520 and i have error code c550 how to reset ? and if i copy this line toshiba.jpg
any ide please ? \


thanks

[davod.mardani]

Re: toshiba e studio 520

Please check internal Test Print (04-142)

Sent from my SM-N900 using Tapatalk

[Riyadh hossain]

Re: toshiba e studio 520

Please check internal Test Print (04-142)

Sent from my SM-N900 using Tapatalk

1) first clean radf
2) then change radf circuit
3)next change slg board
4) power supply fuse

[blackcat4866]

Re: toshiba e studio 520

When you looked up C550 error, what does the manual say?

The line that you are showing on copies is most likely mis-aligned paper tray side guides, combined with the RADF matt incorrectly aligned. So the paper is too far to one side, and the matt too far to the opposite side. My suggestion is to follow the image adjustment section of the manual. It will step you through aligning prints, then aligning the scanner off the glass, then aligning images through the RADF. When that is complete, remove the matt, align it to the indexes on the glass, and close the RADF to re-attach it.
=^..^=