Hello,
i have a problem with my estudio 182 since i change the upper and lower fuser.
It print well, except when i ask recto verso, the sheet fall after printing the upper side, and the printer system indicate jam. I remove the sheet and it will retry. Sometimes, rarely, it will work.
IMG_20160219_073954-960x1280.jpgIMG_20160219_074006-1280x960.jpg
What should i check to correct this ?
Thanks,
Julien
i have a problem with my estudio 182 since i change the upper and lower fuser.
It print well, except when i ask recto verso, the sheet fall after printing the upper side, and the printer system indicate jam. I remove the sheet and it will retry. Sometimes, rarely, it will work.
IMG_20160219_073954-960x1280.jpgIMG_20160219_074006-1280x960.jpg
What should i check to correct this ?
Thanks,
Julien