Toshiba e Studio 355se

[Guest]

Hello everyone!
First time poster, long time reader of information from this site. I have 3 e Studio 355se's that need to be completely factory reset. I work for an electronics recycling company that resells older equipment after I try to fix them up. I tried a couple of different 08 codes(203, 672, 693, 690 value 2) but when I print out functions list there is still the name of the school we received these copiers from. I do not need to save any settings or anything as we are going to be selling them probably to a true resale place that can set all of the settings. Thank you very very much for your help!

[NSD]

Re: Toshiba e Studio 355se

You are using old codes. The 355se is ebridgex and the codes are different. I know 9083 is nic initialise and 9081 is dept management initialise. The hdd is formated on 3-C option 3 but then firmware needs applying or the machine wont work.

Sent from my SM-G920F using Tapatalk

[Texpert]

Re: Toshiba e Studio 355se

I tried 9081 but it did not do anything. I am thinking that I am going to have to format the hard drive and call it a day. Thank you very much for the reply anyways NSD. Very much appreciated.

[Sriyanjan]

Re: Toshiba e Studio 355se

Try 9090

Sent from my HTC Desire 820s dual sim using Tapatalk

[arnh79]

Re: Toshiba e Studio 355se

You are using the right codes, the e355SE is eBridge 3, not eBridge X. However, those codes will not clear the fax ID which is what I assume is showing up on your Function List. Press User Functions key, select "Admin", type in password: 123456, go to "Fax" and select "Terminal ID". Clear the name and number and that should do it.

[Big_Al]

Re: Toshiba e Studio 355se

Hold down * and 1 while powering on then enter 100 start. That initialized the fax option to factory defaults.