E Studio 450 Paper feed Units

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • yormets
    Trusted Tech

    250+ Posts
    • May 2009
    • 336

    #1

    E Studio 450 Paper feed Units

    I have an old E450 that needs its paper feed units rebuilt. I brought out some units from a 451C however they didn't quite fit. I have access to E353, E350, E452 units as well as 2830 and 3510 units. Are any of these going to fit the 450 so I don't have to rebuild the units at the customers place?
    Thanks
    Roy
  • blackcat4866
    Master Of The Obvious

    Site Contributor
    10,000+ Posts
    • Jul 2007
    • 22997

    #2
    Re: E Studio 450 Paper feed Units

    The E353, E350, E452 paper feed units should all work for you. Don't forget the registration and paper feed clutch, both on the rear frame. =^..^=
    If you'd like a serious answer to your request:
    1) demonstrate that you've read the manual
    2) demonstrate that you made some attempt to fix it.
    3) if you're going to ask about jams include the jam code.
    4) if you're going to ask about an error code include the error code.
    5) You are the person onsite. Only you can make observations.

    blackcat: Master Of The Obvious =^..^=

    Comment

    • yormets
      Trusted Tech

      250+ Posts
      • May 2009
      • 336

      #3
      Re: E Studio 450 Paper feed Units

      But first I will show them my heroic efforts to solve their issues. All new feed tires and such. I can hear some clutch rattling on warm up. Perhaps if I wet it down with some WD everything will be fine! I would suspect the feed. Are they still available? They have had this thing since I sold it to them in 2008. It's still below 150,000

      Comment

      • blackcat4866
        Master Of The Obvious

        Site Contributor
        10,000+ Posts
        • Jul 2007
        • 22997

        #4
        Re: E Studio 450 Paper feed Units

        I hope you don't mean WD40. That can cause serious damage to any plastic. You can work alcohol into the clutches until it start coming through clear. They cannot be disassembled though. As far as I know, clutches are still available: Toshiba E STUDIO 450 Clutches

        =^..^=
        If you'd like a serious answer to your request:
        1) demonstrate that you've read the manual
        2) demonstrate that you made some attempt to fix it.
        3) if you're going to ask about jams include the jam code.
        4) if you're going to ask about an error code include the error code.
        5) You are the person onsite. Only you can make observations.

        blackcat: Master Of The Obvious =^..^=

        Comment

        Working...