Hello Again Fellow Copier Techs
I have had a look at this machine as it is saying "service recommended for SPC". I have checked 05-244 and it is too high running at 1000v (should be 400-800). The service manual says to change the HVT board however I was wondering if a firmware upgrade would fix this problem as the copies are perfect and it had developer and a drum 50,000 pages ago. Total Copies is 450,000.
Any help would be appreciated
Regards
Fuzzylogic
I have had a look at this machine as it is saying "service recommended for SPC". I have checked 05-244 and it is too high running at 1000v (should be 400-800). The service manual says to change the HVT board however I was wondering if a firmware upgrade would fix this problem as the copies are perfect and it had developer and a drum 50,000 pages ago. Total Copies is 450,000.
Any help would be appreciated
Regards
Fuzzylogic
Comment