[Jamming] Toshiba E-Studio 281 c

[Orion2010]

I have e problem with Toshiba e -studio 281 c.
In the first tray the paper stuck during the process of printing but from the other trays the process of printing is ok.
I have cleaned pick up, and also changed it to all block pick up but i have the same problem..
What can I do next?Do you have any suggestion?IMG-20161223-WA0004.jpgIMG-20161223-WA0005.jpgIMG-20161223-WA0006.jpg

[NeoMatrix]

Re: Toshiba E-Studio 281 c

Never worked on a ES281 if they're anything like the ES165-205
you may like to check the feed solenoid contact pad has not turned sticky like chewing gum.
If so remove the old contact pad and replace with a new one.

You ""MUST"" replace the contact pad otherwise the solenoid will continue to hold the plunger down as if it was magnetised.

Replace the solenoid contact pad.

[Mr Spock]

Re: Toshiba E-Studio 281 c

Looks like the front and rear paper guides are either not touching paper or they are broken and not centered in the paper tray.