e-Studio 150, dead, shows "d" in display... (Sharp machine)

[Oystercopy]

Hey Guys,

I sold this machine new to this customer. There is no "d" code in the manual, but I pulled all the logic connectors and plugged them back in. I suspect this to be either a defective Power Supply or Logic board. Anybody have any experience with this? Or maybe some used parts I could use?

Thanks in advance,
OC

[Mr Spock]

Re: e-Studio 150, dead, shows "d" in display... (Sharp machine)

been a long while since I saw one of these..... I think this is stuck in firmware download mode. You will need to push firmware to it and if that does not work then nvram or main pwb.