After setting new developer the machine (e-STUDIO 233) indicates Adding toner

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • cornelbranga
    Junior Member
    • Dec 2014
    • 3
    #1

    After setting new developer the machine (e-STUDIO 233) indicates Adding toner

    Hi everyone,
    I have a Toshiba e-STUDIO 233 that indicates Replace toner cartridge, even with a new one (Katun).
    I replaced the developer (05-200) but the message didn't change.
    Any suggestion would be appreciated.
    Thanks in advance.
    Tags: developer, e-studio233, toner, toner add, toshiba
    • davel
      Technician

      1,000+ Posts
      • Oct 2011
      • 1103
      #2
      Re: After setting new developer the machine (e-STUDIO 233) indicates Adding toner

      Call an experienced tech.

        Comment

        • blackcat4866
          Master Of The Obvious

          Site Contributor
          10,000+ Posts
          • Jul 2007
          • 23006
          #3
          Re: After setting new developer the machine (e-STUDIO 233) indicates Adding toner

          It's pointless to tell you, since no parts are available for this model ... but there is a very common gear failure in the toner bottle drive. Disassemble it and you'll see, bit there's nothing that you can do about it:

          toner bottle drive.JPG

          =^..^=
          If you'd like a serious answer to your request:
          1) demonstrate that you've read the manual
          2) demonstrate that you made some attempt to fix it.
          3) if you're going to ask about jams include the jam code.
          4) if you're going to ask about an error code include the error code.
          5) You are the person onsite. Only you can make observations.

          blackcat: Master Of The Obvious =^..^=

            Comment

            • riyadh hossainbd
              Trusted Tech
              • Dec 2015
              • 239
              #4
              Re: After setting new developer the machine (e-STUDIO 233) indicates Adding toner

              Originally posted by blackcat4866
              It's pointless to tell you, since no parts are available for this model ... but there is a very common gear failure in the toner bottle drive. Disassemble it and you'll see, bit there's nothing that you can do about it:

              [ATTACH=CONFIG]43607[/ATTACH]

              =^..^=
              this picture is for es452 series not es233
              solution:
              08#665
              05#200
              after auto adjust complete reduce some value in 05#201 (such as 150 to 145)

                Comment

                • Phil B.
                  Field Supervisor

                  10,000+ Posts
                  • Jul 2016
                  • 22798
                  #5
                  Re: After setting new developer the machine (e-STUDIO 233) indicates Adding toner

                  Originally posted by cornelbranga
                  Hi everyone,
                  I have a Toshiba e-STUDIO 233 that indicates Replace toner cartridge, even with a new one (Katun).
                  I replaced the developer (05-200) but the message didn't change.
                  Any suggestion would be appreciated.
                  Thanks in advance.
                  +1 to the TOO old comment

                  KATUN TONER SUX...steer clear

                    Comment

                    Previous template Next
                    Working...