[Error Code] Toshiba estudio 3508a error f101-1

[etsmultan]

Can any body help me to resolve F101-1 in Toshiba e studio 3508a.If some one has firmware pls send me..mmazhar.javed@gmail.com

[antone]

Re: Toshiba estudio 3508a error f101-1

replace HDD

Sent from my SM-N950U using Tapatalk

[Copier & printer]

Re: Toshiba estudio 3508a error f101-1

Toshiba 3508A If some one has firmware pls send me.. umar.farooq1301@gmail.com

[SalesServiceGuy]

Re: Toshiba estudio 3508a error f101-1

HDD, SYS board, Setting 1. Turn the power of the equipment OFF and check the
connection of the HDD.
- Connector and harness check
- Check if the connector pins of the HDD are bent.
- Check if HDD for other equipment is not installed.
- Check if SRAM for other equipment is not installed.


2. If the error still occurs after step 1, perform the following.
- Perform HS-73 Firmware Assist mode -> Key
Backup/Restore and check that each Key Status is
"OK".
- If not, recover the key (press [Key] and select the
menu, and then press [Execute]).


3. If the error still persists after step 2, perform the
following.
- Perform HS-73 Firmware Assist mode -> Format
HDD, and then install "System software" (HS-49
Firmware Update mode -> SYSTEM SOFTWARE
(HD Data)).
Notes:
The following items will be deleted by HS-73
Firmware Assist mode -> Format HDD.




If F101_1 occurs with secure HDD or the error
persists after performing step 3, perform step 3 after
performing HS-74 HDD Assist mode -> Revert
Factory Initial Status HDD.


4. If the error persists even after step 3, replace the HDD.


5. If the error persists even after step 4, replace the HDD
harness.

[Copier & printer]

Re: Toshiba estudio 3508a error f101-1

I try this not work f101 still

[blackcat4866]

Re: Toshiba estudio 3508a error f101-1

I try this not work f101 still

Specifically, what did you do? =^..^=

[samarik]

Re: Toshiba estudio 3508a error f101-1

HDD, SYS board, Setting 1. Turn the power of the equipment OFF and check the
connection of the HDD.
- Connector and harness check
- Check if the connector pins of the HDD are bent.
- Check if HDD for other equipment is not installed.
- Check if SRAM for other equipment is not installed.


2. If the error still occurs after step 1, perform the following.
- Perform HS-73 Firmware Assist mode -> Key
Backup/Restore and check that each Key Status is
"OK".
- If not, recover the key (press [Key] and select the
menu, and then press [Execute]).


3. If the error still persists after step 2, perform the
following.
- Perform HS-73 Firmware Assist mode -> Format
HDD, and then install "System software" (HS-49
Firmware Update mode -> SYSTEM SOFTWARE
(HD Data)).
Notes:
The following items will be deleted by HS-73
Firmware Assist mode -> Format HDD.




If F101_1 occurs with secure HDD or the error
persists after performing step 3, perform step 3 after
performing HS-74 HDD Assist mode -> Revert
Factory Initial Status HDD.


4. If the error persists even after step 3, replace the HDD.


5. If the error persists even after step 4, replace the HDD
harness.

I have this Error F 101 will Do the steps and reply hope this will work for me reply need some time for assembling.

[samarik]

Re: Toshiba estudio 3508a error f101-1

Hey... its working 100 % thank you so much all steps has been followed completed in step 3