e-studio 307 hard drive install

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • bruce 49dcs
    Trusted Tech

    100+ Posts
    • Jan 2017
    • 140
    #1

    e-studio 307 hard drive install

    got f101-1 formatted hard drive loaded firmware didnt work
    replaced hard drive from a working machine did key backup and restore formatted drive loaded firmware did key backup and recovered key and license
    all said complete and sucessful rebooted the mfp and it wont come out of rainbow screen saying checking system pleas dont turn off I think I had this before but cant remember
    will it come on after a long time or did i do something wrong
    thanks for your help
    bruce
    Tags: backup, drive, formatted, key
    • blackcat4866
      Master Of The Obvious

      Site Contributor
      10,000+ Posts
      • Jul 2007
      • 22703
      #2
      Re: e-studio 307 hard drive install

      If I read that correctly, you went wrong when you tried to use the data on the working hard drive. Each machine has a unique encryption key, and cannot read data from another machine's drive.

      So, format the working drive, and reload firmware like it's an empty drive. All data will be loaded with the correct encryption and will read correctly. Was that clear? =^..^=
      If you'd like a serious answer to your request:
      1) demonstrate that you've read the manual
      2) demonstrate that you made some attempt to fix it.
      3) if you're going to ask about jams include the jam code.
      4) if you're going to ask about an error code include the error code.
      5) You are the person onsite. Only you can make observations.

      blackcat: Master Of The Obvious =^..^=

        Comment

        • bruce 49dcs
          Trusted Tech

          100+ Posts
          • Jan 2017
          • 140
          #3
          Re: e-studio 307 hard drive install

          I did format the drive using 3c assist mode should i use 4c factory format to completly erase the hard drive then reload the firmware

            Comment

            • blackcat4866
              Master Of The Obvious

              Site Contributor
              10,000+ Posts
              • Jul 2007
              • 22703
              #4
              Re: e-studio 307 hard drive install

              I'm surprised that 3C > format wasn't enough. Yes 4C next.
              If you'd like a serious answer to your request:
              1) demonstrate that you've read the manual
              2) demonstrate that you made some attempt to fix it.
              3) if you're going to ask about jams include the jam code.
              4) if you're going to ask about an error code include the error code.
              5) You are the person onsite. Only you can make observations.

              blackcat: Master Of The Obvious =^..^=

                Comment

                • bruce 49dcs
                  Trusted Tech

                  100+ Posts
                  • Jan 2017
                  • 140
                  #5
                  Re: e-studio 307 hard drive install

                  well I went in today and the machine was sitting there ready to go I made copies fine the only thing that changed was the ip address so i fixed that and all is well
                  my customer told me about an hour after i left the machine started running so i guess and i think i remmeber this from a while ago it took over an hour for the machine to initialize the firmware upgrade
                  thanks for your help all is well now

                    Comment

                    • blackcat4866
                      Master Of The Obvious

                      Site Contributor
                      10,000+ Posts
                      • Jul 2007
                      • 22703
                      #6
                      Re: e-studio 307 hard drive install

                      Congratulations. Loire 2X are notoriously slow booting back from a firmware update. At one point I called another tech because 08 mode had not yet come up after 25 minutes. He said to wait another 20minutes, nothing to worry about yet. =^..^=
                      Last edited by blackcat4866; 06-17-2021, 12:35 AM.
                      If you'd like a serious answer to your request:
                      1) demonstrate that you've read the manual
                      2) demonstrate that you made some attempt to fix it.
                      3) if you're going to ask about jams include the jam code.
                      4) if you're going to ask about an error code include the error code.
                      5) You are the person onsite. Only you can make observations.

                      blackcat: Master Of The Obvious =^..^=

                        Comment

                        Previous template Next
                        Working...