Just passing along...
Couple times in the field, once on a new setup.
Soon as the finisher moveable tray starts to move, it drops to the bottom with a loud bang.
E-clip that holds the gear on, is also bent out of shape or missing. Once, the plastic area that holds the pin
is stripped, requiring the gear to be replaced. Until I had one brand new out of the box do it, I thought
the end user might have been pushing/pulling on the tray, placing something heavy on the tray, or, had it
obstructed in some way.
M6I139169.JPG
Couple times in the field, once on a new setup.
Soon as the finisher moveable tray starts to move, it drops to the bottom with a loud bang.
E-clip that holds the gear on, is also bent out of shape or missing. Once, the plastic area that holds the pin
is stripped, requiring the gear to be replaced. Until I had one brand new out of the box do it, I thought
the end user might have been pushing/pulling on the tray, placing something heavy on the tray, or, had it
obstructed in some way.
M6I139169.JPG