e Studio 256 Can't get in 08 Mode

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • copyguy69
    Technician

    50+ Posts
    • Feb 2016
    • 94

    #1

    e Studio 256 Can't get in 08 Mode

    Machine will not let me into the 08 mode. I can get into the 05 just fine. In regular copy mode the 8 and 0 buttons respond just fine so I don't believe it's a display pad issue. Any suggestions are welcome. Thanks in advance

    copyguy69
  • blackcat4866
    Master Of The Obvious

    Site Contributor
    10,000+ Posts
    • Jul 2007
    • 22997

    #2
    Re: e Studio 256 Can't get in 08 Mode

    Are you able to perform other machine functions? I seem to recall trying to enter 08 mode during a HDD failure, and it did not enter 08 mode. =^..^=
    If you'd like a serious answer to your request:
    1) demonstrate that you've read the manual
    2) demonstrate that you made some attempt to fix it.
    3) if you're going to ask about jams include the jam code.
    4) if you're going to ask about an error code include the error code.
    5) You are the person onsite. Only you can make observations.

    blackcat: Master Of The Obvious =^..^=

    Comment

    • tonerjockey
      Senior Tech

      500+ Posts
      • Apr 2014
      • 567

      #3
      Re: e Studio 256 Can't get in 08 Mode

      Hey blackcat4866, i had a feeling you would be the one to come thru for me.
      you usually have great help for so many.

      i did interpret that the hexadecimal was read from the left to right, but i wonder if in my haste, i forgot.

      i need to reply to an earlier post i had for a different code on this one.

      it had the CA00. i went out and inspected it and found the yellow developer low.
      i installed the new Y. Dev bag, calibrated it and i think i forgot to reset that counter??

      but it had been down. after the dev. it worked fine except that it showed the maintenance message.

      and man, that color developer is gold dust if you catch my drift...

      thank you very much for the clarification.

      have a nice evening.

      Comment

      Working...