Removed and cleaned Transfer Belt unit, all Drums & Dev. units and image control sensor. Check 08 2528,2529,2530,2531 reset all to zero. 2531 will not stay on zero.Go back to zero [ 1 ] I need help PLEASE
-
-
Re: Toshiba E3555C Code CE40
A very simple way of diagnosing this issue:
Let the machine error out. Usually that isn't difficult.
Remove the primary transfer belt without disturbing the latent patches on the belt.
Examine the patches.
Are there any latent patches on the belt?
Which color patches (C, M, Y, K) are poorly filled, poorly formed, lines, smudges, ... whatever?
Is there a brown (or other color) background color on the belt?
If all the patches are perfect and the rest of the belt is clean then examine the patch sensors.
When it errors out, take a picture of the undisturbed primary transfer belt assembly set on the table.
=^..^=If you'd like a serious answer to your request:
1) demonstrate that you've read the manual
2) demonstrate that you made some attempt to fix it.
3) if you're going to ask about jams include the jam code.
4) if you're going to ask about an error code include the error code.
5) You are the person onsite. Only you can make observations.
blackcat: Master Of The Obvious =^..^= -
Re: Toshiba E3555C Code CE40
Did you forget about this thread?
If you aren't going to try the suggestions, why start three more new threads?If you'd like a serious answer to your request:
1) demonstrate that you've read the manual
2) demonstrate that you made some attempt to fix it.
3) if you're going to ask about jams include the jam code.
4) if you're going to ask about an error code include the error code.
5) You are the person onsite. Only you can make observations.
blackcat: Master Of The Obvious =^..^=Comment
Comment