3530c 3540c

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • bruce 49dcs
    Trusted Tech

    100+ Posts
    • Jan 2017
    • 140
    #1

    3530c 3540c

    trying to save an old dog I have a bad cyan developer drum unit in the 40c and a good one from a 30c can I put the 30c unit in the 40c and should I swap the toner sensors or will it just not work at all
    thanks people
    ps he probably will buy another machine from me but im just trying to give him a chance
    Tags: 30c, 40c, unit, work
    • blackcat4866
      Master Of The Obvious

      Site Contributor
      10,000+ Posts
      • Jul 2007
      • 22927
      #2
      Re: 3530c 3540c

      These two machines are one generation apart, Masherbrum versus Mash X. Many of the mechanical parts are the same.

      I have successfully substituted D-F25C for D-FC28C developer starter.

      The EPU units are listed as:
      EPU-FC25-C 6LJ01385300 for eS3540
      EPU-FC28-C 6LJ01385300 for eS3530
      ... so no, I would not think that you'd have success directly swapping units (but I've never tried it). You can swap different color units of the same type (FC25 or FC28 respectively) by swapping the front cover of the EPU.

      If you're just trying to keep a customer temporarily, I think that your best hope is to rent them the working machine. In this way they have encouragement to take some action, instead of waiting until the rental dies too. =^..^=
      If you'd like a serious answer to your request:
      1) demonstrate that you've read the manual
      2) demonstrate that you made some attempt to fix it.
      3) if you're going to ask about jams include the jam code.
      4) if you're going to ask about an error code include the error code.
      5) You are the person onsite. Only you can make observations.

      blackcat: Master Of The Obvious =^..^=

        Comment

        • Rusty.Harris
          Senior Tech

          Site Contributor
          500+ Posts
          • Jan 2021
          • 607
          #3
          Re: 3530c 3540c

          Looks like the toner sensor & developer units are the same for the entire series.
          The front "color" plates might be different though.

            Comment

            • SalesServiceGuy
              Field Supervisor

              Site Contributor
              5,000+ Posts
              • Dec 2009
              • 8081
              #4
              Re: 3530c 3540c

              Cancel your service contract and bill this customer for time and materials. They will get the message soon enough and do not upgrade to some other used dog because they are too cheap.

                Comment

                Previous template Next
                Working...