Tosh ES 450 eb 50 code?

Collapse
X
 
  • Time
  • Show
Clear All
new posts

  • ToshibaTech
    replied
    That's the first bearings I've ever heard of locking up on Toshibas... are we just lucky?

    Leave a comment:


  • Hansen88
    replied
    Thanks for the replys. I went there myself to look at the problem and found a paper scrap on a bridge unit actuater and that was the problem. It also had a main motor error code that was from the fuser bearings being locked up.

    Leave a comment:


  • emujo
    replied
    Assuming you have feed tires and clutches in good shape, more than likely you have dust/dirt build up in sensors that detect paper travling through the verticle paper path. Disassemble and clean the sensors, check the condition of the actuator flags (nicks/flattened spots) and replace as necessary. The bridge unit sensors can also give you EB50 codes if they are filthy.

    Leave a comment:


  • jamesyboy
    replied
    [EB50] Paper left on the transport path due to multiple feeding

    p feed problem try changing feed stations over

    change feed tyres!

    Leave a comment:


  • Hansen88
    started a topic Tosh ES 450 eb 50 code?

    Tosh ES 450 eb 50 code?

    Hello I was wondering if anyone has run into this code and has a fix for it? I do have the manuals but like usual everything checks out but still have problem. Thanks for any help.
Working...