Returning E71

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • Toshitec
    MFP Engineer
    • May 2011
    • 22
    #1

    Returning E71

    Hello,
    Can someone help me ? I am struggeling with an error in a ES-207.
    It keeps jamming with the code E71 (orig. registration not reached in RADF)
    Paper gets in and comes out straight and not deformed.
    I changed the reg. switch, changed the doc feed rollers (DF-Kit) and checked the harness.
    But E71 is still coming back, anyone an idea ??
    Thanks for your reply...
    Tags: 207, code, doc, error, feed, feed rollers, harness, jamming, kit, registration, switch
    • michaelc
      Field Tech

      Site Contributor
      500+ Posts
      • Mar 2011
      • 590
      #2
      Have you tried cleaning the rollers and changing the feed/sep roller? Might be worth doing a sensor check to.
      It didn't say that I couldn't do it in the manual.

        Comment

        • Toshitec
          MFP Engineer
          • May 2011
          • 22
          #3
          Hello Michael, thanks again for your reply. Those are just the two things I tried at first. I have used a new doc-feederollerkit and also a new registration sensor in the MR-3019 doc feeder.
          Than I came at a point were I got stuck in this problem. Any suggestions ??!!! Thanks...

            Comment

            Previous template Next
            Working...