Toshiba 2060

[Guest]

I need the parts manual for this machine(B/W 2060) , are the parts listed in the service manual?

I am looking to replace some parts in the paperfeed section, rollers, lift motor, and clutch.

I can downl;oad a service manual for around $12.00, just want to make sure im getting what i need.
Thanks , in advance

[JustManuals]

Re: Toshiba 2060

This Parts & Service Manual can now be purchased for $12.77 and downloaded immediately after payment from

Just Manuals ~ The Internet's largest selection of manuals ~ Instant Downloads


Paul@justmanuals.com

[arnh79]

Re: Toshiba 2060

Parts are only listed in parts manual, not service manual or handbook.

[JustManuals]

Re: Toshiba 2060

I combine the Parts manual with the Service manual and sell it at one price (not like some of my competitors) . The service handbook is a different file entirely:

http://www.justmanuals.com/toshiba-copier-206028602870-service-handbook-p-1221.html

http://www.justmanuals.com/toshiba-copier-2060-2860-2870-parts-service-manual-p-1222.html

Paul@justmanuals.com

[unclegg]

Re: Toshiba 2060

I need the parts manual for this machine(B/W 2060) , are the parts listed in the service manual?

I am looking to replace some parts in the paperfeed section, rollers, lift motor, and clutch.

I can downl;oad a service manual for around $12.00, just want to make sure im getting what i need.
Thanks , in advance

Contact me and I can give you a link to get this manual cheaper.
unclegg@fletchersite.com

[JustManuals]

Re: Toshiba 2060

Contact me and I can give you a link to get this manual cheaper.
unclegg@fletchersite.com

$16.00 for a manual in NOT cheaper. And I'm sure it doesn't include the Parts manual as well. Your posts here are a violation of the terms of service of this forum and has been reported.- Do you think I pay good money to advertise here so you can come along and post for another site? Get lost bud!

[Bear]

Re: Toshiba 2060

I have one of these units, and a 2860 also, that I am in the process of tearing down. If there are any parts you might like me to save please let me know soon as you can, I'm planning to have them both totally dismantled before tomorrow night