I've got a second hand Toshiba e-studio16 with a broken feeder.
I've already glued the feeder, but I don't know how to connect the electrical wires because the previous owner has disconnected these wires.
Without connecting, the printer keeps saying that there is a paper jam in the feeder.
These wires have the following colors: black + black + yellow + orange + brown + red
I've also found the "connector box" where these should be inserted so that the connector box can be put on the motherboard.
Tx for your help - Ivan
I've already glued the feeder, but I don't know how to connect the electrical wires because the previous owner has disconnected these wires.
Without connecting, the printer keeps saying that there is a paper jam in the feeder.
These wires have the following colors: black + black + yellow + orange + brown + red
I've also found the "connector box" where these should be inserted so that the connector box can be put on the motherboard.
Tx for your help - Ivan