Toshiba eStudio 3511 color copier

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • skibum
    Independent Service Tech
    Site Contributor
    100+ Posts
    • Apr 2009
    • 231

    #1

    Toshiba eStudio 3511 color copier

    I have one of these that appears to have a bad hdd. When turned on the machine is frozen on the start screen ( no menu home page). I can hear the hdd clicking but not spinning, just clicks. It is easy to remove and replace the hdd but where can I get the system software and then hao do you install it. I am a Canon tech and we use a software from Canon (service support tool) to install the system software. Does anyone have access to this? What is the procedure to change? Thanks for any help someone can offer.
  • JustManuals
    Field Supervisor

    5,000+ Posts
    • Jan 2006
    • 9838

    #2
    Re: Toshiba eStudio 3511 color copier

    This Parts & Service Manual can now be purchased for $12.77 and downloaded immediately after payment from:

    The firmware is also available.

    Just Manuals, The Internet's largest selection of manuals ~ Instant Downloads


    Paul@justmanuals.com

    Comment

    • seb197
      French Tech
      • Feb 2013
      • 10

      #3
      Re: Toshiba eStudio 3511 color copier


      Update of HDD program data and UI data.

      Create partitions. (In case of using the download jig, this is not necessary.)
      While pressing [3] and [CLEAR] button, turn the power ON.
      When “Firmware Version Up Mode” appears on the LCD, key in [3] and press the [START]
      button.


      FIRMWARE UPDATING (USB storage device key)

      Turn ON the power while [4] button and [9] button are pressed simultaneously.
      The screen for selecting the items to be updated is displayed after 3 minutes. “*” is displayed
      next to the items to be updated. (All items other than "0. OS Update" are selected in the default
      settings.)
      04/
      select all
      “Update Completed.” is displayed at the bottom of the LCD screen after the updating is
      completed properly.
      Turn OFF the power, remove the USB storage device and install the connector cover.


      Format the HDD. (Setting Mode (08-690: 2))
      * When the FAX unit (GD-1150) is installed.
      Start up with the FAX Clearing Mode (1*)
      Perform the 1*-100 (FAX Set Up), 1*-102 (Clearing the image data) of the FAX Clearing
      Mode.


      Perform the initialization of the updating data (NVRAM updating).
      a. Turn ON the power while [0] button and [8] button are pressed simultaneously.
      b. Key in “947”, and then press the [START] button.
      c. Press the [INITIALIZE] button.

      http://9x75g7.1fichier.com/ firm_es4511v4006.zip
      Last edited by seb197; 03-04-2013, 09:46 PM.
      I can make a copy?

      Comment

      Working...