E studio 280 scanning an hour later then what the time is.

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Valeo175
    Technician
    • Apr 2011
    • 22

    #1

    E studio 280 scanning an hour later then what the time is.

    All,

    I have an estudio 280 that is scanning an hour later than what the time is set to on the machine. Does anyone know what might cause this? I have the time on the machine adjusted to the correct time. Thanks in advance.
  • emujo
    Field Supervisor

    2,500+ Posts
    • Jun 2009
    • 3009

    #2
    Re: E studio 280 scanning an hour later then what the time is.

    Try changing the daylight savings settings +/- 1 hour...Emujo
    If you don't see your question answered in the forum, please don't think it's OK to PM me for a personal reply...I do not give out firmware and/or manuals.

    Comment

    • Valeo175
      Technician
      • Apr 2011
      • 22

      #3
      Re: E studio 280 scanning an hour later then what the time is.

      Where is that in the menu...I was unable to locate that settings. It is not within the clock settings

      Originally posted by emujo
      Try changing the daylight savings settings +/- 1 hour...Emujo

      Comment

      • michaelc
        Field Tech

        Site Contributor
        500+ Posts
        • Mar 2011
        • 590

        #4
        Re: E studio 280 scanning an hour later then what the time is.

        Originally posted by Valeo175
        All,

        I have an estudio 280 that is scanning an hour later than what the time is set to on the machine. Does anyone know what might cause this? I have the time on the machine adjusted to the correct time. Thanks in advance.
        Just a silly question, is the time on your pc/laptop correct?
        It didn't say that I couldn't do it in the manual.

        Comment

        • jonezy999
          just one copy??

          Site Contributor
          500+ Posts
          • Feb 2010
          • 952

          #5
          Re: E studio 280 scanning an hour later then what the time is.

          Maybe configured to a time server?
          I have not failed. I've just found 10,000 ways that won't work. ~Thomas Edison

          Comment

          Working...