[Electrical] Installing a GQ-1240 on a 855

[oldschool]

Anyone ever install a GQ-1240 kit on a E studio 855
I'm working with a Tech that is installing a vending device on this copier. He received this kit but said it has a different connector than that of all the other GQ Coin Controller kits. He said he did not receive any instructions with the kit. What I'm looking for are the instructions that Toshiba would send with the GQ-1240 kit. I could probably get by just by giving him connector numbers if anyone has them.

[seb197]

Re: Installing a GQ-1240 on a 855

instructions+Key Counter Harness Reference Chart

[oldschool]

Re: Installing a GQ-1240 on a 855

Thanks for the quick reply seb197!
Toshiba sent us documentation on all the other kits but this one.

Thanks again.