I will soon be replacing several 520 & 523's with the 556. Is any body aware of any issues with this model.
I have two that are almost a year old and they have had a few problems, Power Supply, logic board, IH board, touch screen and the 3-hole punch board to name a few. Some of this may have been wiring issues in a new building but I can not prove that. Local power company and contractor can not seem to give me a solid answer yet. To busy pointing fingers.
The 520,523 & 555's I have out will do 4 or 5 million with little effort. I realize they are basically the same but after getting burned on the 355 series I just thought I'd check and see if there was something that I should be aware of.
I have two that are almost a year old and they have had a few problems, Power Supply, logic board, IH board, touch screen and the 3-hole punch board to name a few. Some of this may have been wiring issues in a new building but I can not prove that. Local power company and contractor can not seem to give me a solid answer yet. To busy pointing fingers.
The 520,523 & 555's I have out will do 4 or 5 million with little effort. I realize they are basically the same but after getting burned on the 355 series I just thought I'd check and see if there was something that I should be aware of.