Toshiba eStudio 232 Maint Screen Reset

[Guest]

Hi folks. Just acquired the Service Handbook, Manual, & Parts for this machine in prep for a PM. Worked on a TON of eStudio machines over the last 23 years but I'm not so sure about this Maint Screen / Reset Procedure. Maybe I'm just too "old school". I was just wondering if anyone was familiar with this and if they had any advice. The physical PM will be a piece of cake. I just don't want to screw up something in the counters. Thanks. I'm new here, BTW, as of today, but like I said, I have almost a quarter century in this business. If anyone has questions on older machines......fire away. Jim

[jonezy999]

Re: Toshiba eStudio 232 Maint Screen Reset

Before you start the PM, print out the PM support page (9+START KEY/power on) code 103

After the PM (0+5/power on) code 200 DEV Initialize, WITHOUT toner bottle installed. Once value displayed in top left of display becomes stable it should read between 235%-245%. This is dev bias and can be adjusted if the value is not quite spot on using up and down keys on display.

Finally clear the parts you replaced using (6+START) code 2 and extend the PM target (0+8) 251

[michaelc]

Re: Toshiba eStudio 232 Maint Screen Reset

Cant remember the code of the top of my head but need the machine to empty the recycled toner 1st. I just tend to vac the whole thing out like there is money in there somewhere.