Servicing a Toshiba E-Studio 283 that jams from the second cassette on multiple copies. It displays E210. It
jams at the same spot just before the registration roller. The first page comes out fine and then it jams. If you run only
one copy, it doesn't jam. We have replaced:
Paper pickup clutch
Registration clutch
Lower Right Side Door, Stopper for Door, Mylar for Door and Guide for Door, Sensor for Door
Lower Tray Feed Rollers
Pickup Sensor Arm
Lower Feed Clutch
Upper Feed Clutch
2nd Transport Sensor
We have also swapped the pickup units from Tray 1 to Tray 2, Swapped the gears for paper tray lifting from Tray 1 to Tray
2. The bypass and upper cassette work fine. Any suggestions would be welcome. Thanks in advance.
Robin
jams at the same spot just before the registration roller. The first page comes out fine and then it jams. If you run only
one copy, it doesn't jam. We have replaced:
Paper pickup clutch
Registration clutch
Lower Right Side Door, Stopper for Door, Mylar for Door and Guide for Door, Sensor for Door
Lower Tray Feed Rollers
Pickup Sensor Arm
Lower Feed Clutch
Upper Feed Clutch
2nd Transport Sensor
We have also swapped the pickup units from Tray 1 to Tray 2, Swapped the gears for paper tray lifting from Tray 1 to Tray
2. The bypass and upper cassette work fine. Any suggestions would be welcome. Thanks in advance.
Robin
Comment