e203s pulling dv ???

[CCS]

I have a few of these e203s machines out, a couple of them are either pulling or leaking DV on the front frame side... Brand new machines less than 10k, what is the deal with these ???

Has anyone else seen this ?

[dbrownlee]

Re: e203s pulling dv ???

Make sure main charge comb and grid are clean, as well as t/s charger in door.
Hope that helps,
Dave

[CCS]

Re: e203s pulling dv ???

yea, I clean them all up but a few hundred copies later they will start piling dv again under drum at front frame, oh well just a couple of s/calls between pm's for cleaning...

[esam ramadan]

Re: e203s pulling dv ???

may be toner problem

[dbrownlee]

Re: e203s pulling dv ???

Just out of curiosity, is the machine sitting level front to back? Not a lot of room in those developer units. Also maybe check any mylar seals for damage or misplacement.
Dave

[CCS]

Re: e203s pulling dv ???

I'll check those things out at next call, thanks.

[ivovb]

Re: e203s pulling dv ???

Few more things to check:
1. Check if needle electrode is the newest version.
2. Check side seals on the rear and front side near guide rollers for damage.

BR