E-2040C Duplexing issue

[weaponx2121]

I have a machine that while doing duplexing the first side that copies gets what I would call the alligator skin look on a portion of the image and the second side is looks great.. it does this on glass and from the adf and when printing. It does it on black and on color.. it has a new transfer belt and drums and blades all look good. and of course I cleaned everything I could think of.. only thing I could think of is that the fuser could be causing this.. I will try to post some pics if I can figure it out.. thanks

westwater.pdfwestwater2.pdf

[JustManuals]

Re: E-2040C Duplexing issue

This Parts & Service Manual can now be purchased for $12.77 and downloaded immediately after payment from:

http://www.justmanuals.com

Paul@justmanuals.com

[simonsays]

Re: E-2040C Duplexing issue

this is a really easy fix i wouldnt go buying a manual its a very common thing when the machine starts to get dirty i changed my email to justin.penn@yahoo.com email me and im going t0 update my email in this site so it will be in there shortly give me a shout and i can get you fixed in about 10 minutes work

[michaelc]

Re: E-2040C Duplexing issue

What is the GSM of the paper you are using? and are what drawer/cassette are you printing/copying from. Looks a little like the fuser is not fusing the image correctly. I am assuming the pressure is on the fuser.