Hi guys,
Would it cause any major image problems down the track if 08 - 556 and 557 were disabled? machine was calibrated etc but as the firmware was updated to the latest version CE40 keeps coming up. I don't want to put new developer in and I fully calibrated the machine prior and switched off these two codes. Will the print quality deteriorate a lot over time? I have already tried doing sky shots to try and draw some toner out with no cartridge installed but the dev vals are still out after re-running 05 - 204 hence this as a last option.
Cheers
Jay
Would it cause any major image problems down the track if 08 - 556 and 557 were disabled? machine was calibrated etc but as the firmware was updated to the latest version CE40 keeps coming up. I don't want to put new developer in and I fully calibrated the machine prior and switched off these two codes. Will the print quality deteriorate a lot over time? I have already tried doing sky shots to try and draw some toner out with no cartridge installed but the dev vals are still out after re-running 05 - 204 hence this as a last option.
Cheers
Jay
Comment